Peak Limiter - Marani CLP-260 User Manual

Release: from this page it is possible to set the Release Time parameters
of the RMS Compressor.
Once within the page, the RMS Compressor's Threshold can be set by the
VARIATION encoder:
The selectable range of the RMS Compressor's Release Time is from
0.1s to 5s in steps of 0.1s up to 3s and 0.2 from 3s to 5s.
Attack: from this page it is possible to set the Attack Time parameters of
the RMS Compressor.
Once within the page, the RMS Compressor's Threshold can be set by the
VARIATION encoder:
The selectable range of the RMS Compressor's Attack Time is from 5ms
to 200ms in steps of 1ms - from 5ms to 20ms then 5ms - from 20ms to
30ms then 10ms - from 30ms to 100ms and 20ms - from 100ms to 200ms.
Make Up: within this page is possible to set the signal level AFTER the
RMS compressor to make up the reduced level compressed signal,
before to enter the Peak Limiter.
The Gain can be set ranging between -12dBu and +12dBu, by steps of
0.5dBu:
25