Table of Contents
Advertisement
Utility Function: this sub-menu allows to define the remote control
interface [USB or MIDI] to be used for controlling the CLP260 :
From "Interface Utilities", press "ENTER" to access the "Config
Communication" page, allowing to choose the remote control protocol for
the CLP260.
By pressing "ENTER" and then using the VARIATION encoder, can
chosen between the two possible interfaces (USB or MIDI) for the
CLP260.
Particularly, a MIDI channel from 01 to 15 can be selected, or the USB
interfaces
Once selected the desired interface, a double click on the "QUIT" button
is allowing to go back to the original menu.
NOTE: the "QUIT" button, once pressed as many time as necessary, will
bring back to the top LCD level which is the one displaying the Input Level
or the Compressor/Limiter Activity.
Preset 30: LightCmp
Utility Function
Utility Function
Config Communication
Config Communication
Device <MIDI Ch=12>
15
Advertisement
Table of Contents
