Load/Save Preset - Marani CLP-260 User Manual

Load Preset: this page allows the Loading of a preset program from one
of the 16factory presets (1-16) or from one of the 16 user presets:
By pressing ENTER and rotating the "VARIATION" encoder, it is possible
to scroll through all current available user presets.
If the Preset 21 is chosen (AGC_Fat), then pressing the "ENTER" button,
the current temporary window will appear
and the AGC_Fat preset number 21 will be loaded and the sub-menu
page will be left going back to the previous level, updated:
Save Preset: this page allows you to store a new preset, and up to 16, in
the CLP260's memory from the location 17 up to the location 32, skipping
the locations from 1 to 16 reserved to the Factory presets:
By pressing the ENTER button and rotating the "VARIATION" encoder, it
is possible to scroll through the previously saved presets and the
available empty locations (identified by "Empty").
If no user presets are stored, the "Save a Program" screen will show
empty memory locations for all 17-32 presets as shown in the example
below for location 30:
Preset 16: DeepCmp
Load Preset
Load Preset
<Preset:21 AGC_Fat >
Wait : Loading ......
<Preset:21 AGC_Fat >
Preset 21: AGC_Fat
Load Preset
Preset 21: AGC_Fat
Save Preset
13