Rms Compressor - Marani CLP-260 User Manual

RMS Compressor: the RMS compressor, which way of working has been
described yet in the introduction, can be controlled in its parameters
entering the editing screens and scrolling the parameters with the
NAVIGATION encoder and setting them with the VARIATION encoder:
Threshold: from this page it is possible to set the Threshold parameters
of the RMS Compressor.
Once within the page, the RMS Compressor's Threshold can be set by the
VARIATION encoder:
The selectable range of the RMS Compressor's Threshold is from 0dBu
(OFF) to -24dBu in steps of 0.1dBu
Ratio: from this page it is possible to set the Ratio parameters of the RMS
Compressor.
Once within the page, the RMS Compressor's Threshold can be set by the
VARIATION encoder:
The selectable range of the RMS Compressor's Ratio is from 1:1 (Off) up
to 32:1 (Lim) in steps of 1.
H/S Knee: from this page it is possible to set the "Knee" type of the RMS
Compressor.
Once within the page, the RMS Compressor's Threshold can be set by the
VARIATION encoder:
The selectable range of the RMS Compressor's Knee type is from 0%
(Hard) up to 100% (Soft) by steps of 1.
24