Marani CLP-260 User Manual page 20

AGC Exp Thr: from this screen it is possible to set the AGC Expansion
Threshold from -70 dBu up to the Hold Threshold Value; use the
"VARIATION" encoder to set the value.
The following is an example screen for the "AGC Exp Thr" page where the
Expansion Threshold is set to -50dBu
Ch.A A.G.C.
< Exp Thr = -50dB >
AGC Cmp Thr: from this screen it is possible to set the AGC Compression
Threshold from Hold Threshold Value up to 0dBu; use the "VARIATION"
encoder to set the value.
The following is an example screen for the "AGC Cmp Thr" page where
the Compression Threshold is set to -3dBu
AGC Thr Hold: from this screen it is possible to set the AGC Threshold of
the AGC Signal "Hold" area, from -69 dBu up to -1dBu; use the
"VARIATION" encoder to set the value.
The following is an example screen for the "AGC Thr Hold" page where
the Threshold of the Signal "Hold" area is set to -40dBu
19