Powering The Spro 2 On And Off; Restarting The Spro2; Waking Up The Spro2 - Zte Spro2 User Manual

2. Disconnect the adapter when the battery is fully charged.
NOTE: If the battery is extremely low, you may not be able to
power on Spro2 even when it is charging. Allow Spro2 to
charge longer and try again. Contact customer service if you
still cannot power on Spro2 after prolonged charging.

Powering the Spro 2 On and Off

Ensure that the battery is charged.

Press and hold the Power button to turn on the Spro2.

To power it off, press and hold the Power button to open the
options menu. Touch Power off and touch OK.

Restarting the Spro2

If the screen freezes or takes too long to respond, try pressing
and holding the Power button for about 10 seconds to restart
Spro2.

Waking Up the Spro2

The Spro2 automatically goes into sleep mode when it is not in
use for certain time. The touch screen is turned off to save power
and the keys are locked to prevent accidental operations.
You can wake up the Spro2 by following the instruction as below.
1. Press the Power button to turn the touch screen on.
2. Touch and hold any area of the screen to unlock Spro2.
NOTE: If you set an unlock pattern, a PIN or a password for the
Spro2, draw the pattern, or enter the PIN/password to unlock the
Spro2. For more information about setting an unlock pattern, see
Protecting the Spro2 With Screen Locks.
16