Page 1
Network Camera Installation Manual DC-D1223WX Powered by...
Page 2
Before reading this manual This is a basic installation manual for use of an IDIS network camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
Page 3
Before reading this manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1.
• IP filtering, HTTPS, SSL, IEEE 802.1X, and configurable compress and transmit video over ethernet. user authority levels for greater security You can use the IDIS Discovery program to change • Network bandwidth limitation and MAT features for network camera settings or the IDIS Solution Suite...
Part 1 – Introduction Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. Network Camera Open Source Guide Quick Guide Allen Wrench Screws (3 ea.) Network Connector Cover, Cable Access Hole Rubber Rubber, Cable Access Hole Desiccant Rubber...
Part 1 – Introduction Overview Dome Cover Shield Case Side Cable Access Bottom Safety Wire Dome Cover Screws Shield Case • Side Cable Access Hole For routing cables and wires. • Safety Wire Prevents the dome cover from falling on to the floor when detached from the camera.
Part 1 – Introduction Body • Horizontal Rotator Used to adjust the lens' horizontal angle. • SD Memory Card Slot Used to insert a microSD memory card into the camera. (An SLC (Single Level Cell) or MLC (Multi Level Cell) card by SanDisk or Transcend is recommended) •...
It's also possible to do a factory reset by pressing and releasing the reset switch while the camera is turned on or using the IDIS Discovery program from a remote location. A factory reset will reboot the system. For more information on factory reset, refer to the IDIS Discovery operation manual.
Part 1 – Introduction Lens I/O Device Port Variable Focus Automatic Iris Lens 5 6 7 Focus Lever Zoom Lever Alarm I/O Network LED • Focus Lever Audio I/O Network Port Adjust the focal point by turning the lever in Video Out Power LED clockwise or counterclockwise direction.
Page 12
Part 1 – Introduction • Alarm In/Out • Audio In/Out - Out: It is the BJT (Bipolar Junction Transistor) - - Out: Connect an amplifier to this port (line out). open collector output. If the voltage and current This device does not feature a built-in audio exceed the specification limit (Max load: 50mA, amplifier unit and therefore requires the user to Max Voltage: 30VDC), the product could be...
Page 13
For more information on network connection setup, intended, or use such devices to record audio.) refer to the IDIS Discovery operation manual, • When switching over from 12 VDC to PoE as the power source, the system will be rebooted once the •...
Part 1 – Introduction Installation Connector Arrangement Installation of this product does not require the use of special tools. For more information on other devices comprising the overall system, refer to their respective installation manuals. Grounding Alarm Out (Active Low - Installation Alarm Open Collector Output)
Page 15
Part 1 – Introduction Use the screws provided with the camera to secure the bottom cover on a wall or a ceiling. Use the provided guide pattern to check the distance between the screws. Connect external devices, the network cable, and Guide Pattern the power adapter.
Page 16
Part 1 – Introduction Use the screws, anchors provided with the camera to When routing the network cable, use the enclosed secure the bottom cover on a wall or a ceiling. network connector cover. Insert the network connector in the network connector cover and Attach the enclosed desiccant in the bottom cover then route it.
Part 1 – Introduction Angle Adjustment Dimensions The lens can be rotated along three axes. 160mm (6.3”) Lens Rotation Horizontal Rotation Vertical Rotation • Lens Rotation Used to adjust the lens' rotation angle. Turn the rotator in clockwise or counterclockwise direction. •...
Part 2 - Camera Connection Use the camera by connecting to DirectIP™ NVR or non DirectIP™ NVR, VMS such as IDIS Solution Suite Compact. With DirectIP™ NVR-based Layout Audio In Audio Out Alarm Out Power Sensor In Network Camera Monitor Out...
Ideal for using the camera over the network from a remote location. The contents in the camera operation manual are only for users using the camera with non DirectIP™ NVR connection or VMS connection such as IDIS Solution Suite Compact.
ID and password as a safety precaution. camera. Unable to launch IDIS Web. If the IDIS Web login screen is not loading, check which version of Microsoft Internet Explorer you are using. IDIS Web may not launch properly on versions 8.0 or below.
Need help?
Do you have a question about the DC-D1223WX and is the answer not in the manual?
Questions and answers