Adjusting The Brightness; Adjusting The Iris - JVC JY-HM360AG Instructions Manual

Adjusting the Brightness

Adjust the brightness using Iris, Gain and Shutter
speed according to the brightness of the object.
Adjusting the Brightness Automatically
When the [FULL AUTO ON/OFF] switch is set to
"ON", Iris, Gain, Shutter speed and ND filter are
automatically adjusted according to the brightness
of the object to maintain optimum brightness.
MENU/THUMB
AE LEVEL
CANCEL
GAIN WHT BAL SHUTTER
.
Memo :
You can use the cross-shaped button (HI) on
0
the side of the camera recorder to set the target
level (brighter/darker) to maintain optimum
brightness during automatic adjustment.
(A P87 [ AE Level ] )
The convergence speed of the automatic
0
adjustment for gain, shutter and iris can be set
in the menu.
(A P87 [ AE Speed ] )
If one or more of the items (Gain, Iris and
0
Shutter) have been set to "Auto", the value of the
corresponding items when the user button that
is assigned "AE Lock" is pressed can be fixed.
(A P89 [ AE Lock ] )
Adjusting the Brightness Manually
When the [FULL AUTO ON/OFF] switch is set to
"OFF" and [SCENE SELECT] switch is set to
"OFF", some or all of the items (Iris, Gain and
Shutter Speed) can be manually adjusted.
(A P48 [Adjusting the Iris] )
(A P49 [Setting the Gain] )
(A P50 [Setting the Electronic Shutter] )
Memo :
If Iris, Gain and Shutter Speed are manually
0
adjusted, the [AE Level] setting is temporarily
disabled.
Settings for [AE Level] are disabled during the
0
Scene Select mode.
48
Adjusting the Brightness
AE LOCK/4
FULL AUTO
ON
OFF

Adjusting the Iris

You can adjust the aperture of the lens iris manually
or automatically according to the brightness of the
object.
.
Auto Iris (Automatic Adjustment) Mode
1 Set the [FULL AUTO ON/OFF] switch to
"OFF" to turn off the Full Auto mode.
2 Set the [SCENE SELECT] switch to "OFF" to
turn off the Scene Select mode.
3 Press the [IRIS] button to set to the Auto Iris
mode.
The iris is automatically adjusted according to
the brightness of the object.
The lens aperture value (F-number) is not
displayed in the Auto Iris mode.
Memo :
Setting the [FULL AUTO ON/OFF] switch to
0
"ON" to enter Full Auto mode also activates the
Auto Iris mode. In this case, the Gain, Shutter
and White Balance also enter into Auto mode
forcibly.
The switching operation of the [IRIS] switch is
disabled in the Full Auto mode.
You can use the cross-shaped button (HI) on
0
the side control panel to set the target level
(brighter/darker) of the auto iris.
(A P87 [ AE Level ] )
The convergence speed of the auto iris can be
0
set in the menu.
(A P87 [ AE Speed ] )
Manual Iris (Manual Adjustment) Mode
The aperture value (F-number) of the lens can be
set manually.
1 Set the [FULL AUTO ON/OFF] switch to
"OFF" to turn off the Full Auto mode.
2 Set the [SCENE SELECT] switch to "OFF" to
turn off the Scene Select mode.
3 Press the [IRIS] button to set to the Manual
Iris mode.
The lens aperture value (F-number) is
displayed.
IRIS
PUSH AUTO
FULL AUTO
ON
OFF