Table of Contents
Advertisement
C Trimming information
W or Y
: Indicates the available space
in the storage media (W or Y)
: Indicates the time code of the
7
in point
: Indicates the time code of the
8
out point
: Indicates the duration from the
9
in point to the out point
Memo :
The trimmed clip will be saved to the same card
0
slot as that of the original clip.
[Duration] appears in yellow if the duration is 10
0
minutes or longer. Trimming cannot be
performed in this case.
[Duration] appears in yellow if the duration is
0
longer than the recordable time on the storage
media. Trimming cannot be performed in this
case.
When trimming starts, the display switches to
0
the Media Display 2 screen.
5 Specify the in point.
Operate buttons such as O/N or S/T
0
to move the video to the in point.
(A P77 [Playing back] )
Press the [USER1] button at the point you
0
want to start trimming to specify the in point.
6 Specify the out point.
Operate buttons such as O/N or S/T
0
to move the video to the out point.
(A P77 [Playing back] )
Press the [USER2] button at the point you
0
want to end trimming to specify the out point.
7 Perform trimming.
Press the [USER3] button to perform trimming.
Memo :
While trimming is in progress, you can press the
0
[CANCEL] button to return to the thumbnail
screen.
While trimming is in progress, you can press the
0
[DISPLAY] button to switch the display, but the
trimming information is displayed at all times.
When trimming the in and out point, the in point
0
trimmed may be up to one second before the
specified in point and the out point trimmed may
be up to one second behind the specified out
point.
82
Trimming Recorded Clips
Advertisement
Table of Contents
