Table of Contents
Advertisement
3 Set the time interval to start recording in
[Interval Rec].
Set using [Main Menu] B [System] B [Record
Set] B [Rec Mode] B [Rec Interval].
(A P104 [ Rec Interval ] )
4 Start recording.
Press the [REC] button to record only the
0
number of frames specified in [Rec Frames]
and pause.
After the specified time in [Rec Interval] has
0
passed, recording starts again to record only
the number of frames specified in [Rec
Frames] and pause.
Interval Rec continues until the recording is
0
stopped.
The display changes ("STBYN" B "RRECN"
B "STBYN" (red text) B "RRECN" B
"STBYN" (red text)).
The card slot status indicator blinks in green.
0
5 Press and hold the [REC] button.
The card slot status indicator lights up in
0
green.
The display becomes "STBYN".
0
Caution :
Do not remove the SD card during recording
0
(RRECN, red text) or recording pause (STBYN,
yellow text).
To remove the SD card during Interval Rec,
0
press the [CANCEL] button, check that "STBYN"
(white text) is displayed and the card slot status
indicator lights up in green before you remove
the card.
When [Main Menu] B [TC/UB] B [TC
0
Generator] is set to "Free Run" or "Free
Run(Ext)", the time code will be recorded in "Rec
Run".
Audio cannot be recorded. A x mark appears
0
in the audio level meter display.
(A P111 [Audio Level Meter] )
73
Special Recording
Advertisement
Table of Contents
