Table of Contents
Advertisement
Rec Mode
For selecting the record mode for recording to the
SD card.
(A P69 [Special Recording] )
[Setting Values: RNormal, Pre Rec, Clip
Continuous, Frame Rec, Interval Rec]
Memo :
When [Slot Mode] is set to "Backup", this item is
0
fixed at "Normal".
9 Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to "Pre Rec".
[Setting Values: R5sec, 10sec, 15sec]
Memo :
When the frame rate setting in [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is set to "XHQ", "15sec"
cannot be selected.
9 Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to "Frame Rec" or "Interval Rec".
[Setting Values: R1frame, 3frames, 6frames]
9 Rec Interval
For setting the recording time interval when [Rec
Mode] is set to "Interval Rec".
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
104
System Menu
Slot Mode
For setting the operation of the card slot.
Series:
0
Mode that activates the two slots sequentially.
Dual:
0
Mode that activates the two slots at the same
time.
(A P66 [Dual Rec] )
Backup:
0
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to "Normal".
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] button that is assigned with "Backup
Trig".
(A P67 [Backup Rec] )
Memo :
When this is set to "Series", and recordable
0
media are inserted in both slots, pressing the
[REC] button starts recording only to the card in
the selected slot (active slot).
When "Series" is selected, and [Record
0
Format] B [Format] is set to "AVCHD", the clips
are recorded over the slots seamlessly without
interruption in the video.
When this is set to "Dual", and recordable media
0
are inserted in both slots, pressing the [REC]
button starts simultaneous recording to the
cards in both slots.
9 Backup Rec
For starting/stopping backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to "Backup".
Memo :
When recording is stopped due to no remaining
0
space on the media, etc., this item is fixed at
"STOP" and cannot be selected.
Advertisement
Table of Contents
