Sony KP-FS57 Operating Instructions Manual page 12

Connecting optional components (continued)
Connecting a DVD player to COMPONENT VIDEO (HD/DVD) IN
1 Using an audio cable, connect R and L under COMPONENT VIDEO (HD/DVD) IN
1 or 2 on your projection TV to the LINE OUT, AUDIO R and L output connectors on
your DVD player.
2 Using a component video cable, connect Y, P
VIDEO (HD/DVD) IN 1 or 2 on your projection TV to the COMPONENT VIDEO
OUT Y, C , and C
B
3 Press VIDEO or HD/DVD on the remote or INPUT SELECT on the projection TV
until "HD/DVD 1" appears on the screen if you connect your DVD player to
COMPONENT VIDEO (HD/DVD) IN 1, or "HD/DVD 2" for connection to
COMPONENT VIDEO (HD/DVD) IN 2.
Component video cable
(not supplied)
To component
video output
To audio
output
C C Y
R B
COMPONENT VIDEO OUT
12
Using Your New Projection TV
output connectors on your DVD player.
R
Audio cable
(not supplied)
R-AUDIO-L VIDEO
LINE OUT
S VIDEO OUT
DVD
player
Notes
• Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
P /C (blue) C , B-Y or P
B B b
P /C (red) C , R-Y or P
R R r
• Connect nothing to the HD/VD jacks when connecting a DVD player to
COMPONENT VIDEO (HD/DVD) IN 1 or 2.
• If you select "HD/DVD 1" or "HD/DVD 2" on your projection TV screen,
no sound and no picture will be output from MONITOR OUT. This does
not indicate a malfunction.
• When receiving a progressive signal through COMPONENT VIDEO
(HD/DVD) IN, TWIN pictures and CHANNEL INDEX features are not
available, and "DRC-MF" and "GAME MODE" are not selectable.
/C , and P
B B
Rear of
projection TV
To COMPONENT VIDEO
(HD/DVD) IN 1 or 2
(component video input)
AUDIO -
To L (white)
AUDIO -
R (red)
B
R
/C under COMPONENT
R R
COMPONENT VIDEO (HD/DVD) IN
1 2
Y Y
G
P /
B
C P /C
B
B B
HD
B
P /
SYNC
R
C P /C
R R R
VD
R
L L
AUDIO AUDIO
R R
: Signal flow