Crest Audio X-Eight HS Owner's Manual page 77

matrix features
The X-Eight HS includes four
made up of signals from the eight
source.
left, right, and mono levels—
These level controls are used to mix the left, right, and mono signals
into the corresponding
post-fader—left, right, and mono
These three post-fader switches determine whether the left, right and
mono faders have any effect on signals that available to
MASTER
post-left, post-right, post-mono
The left, right and/or mono fader settings have no effect on the
- and/or -
RIGHT MONO TO
The left, right and/or mono faders are introduced into the signal
paths. When the left, right and/or mono are muted, the corresponding
level controls are also muted.
1–4
MATRIX
external input levels—
These level controls are used to mix the external
into the corresponding matrix.The external
located on the rear-panel of the
external matrix routing—
This switch routes the signal from the external
the external
1–4
MATRIX
can be added to each of the four matrices.
When this switch is down, the external
disabled.
mixes. Each of these outputs can be
MATRIX
, left, right, mono and an external
GROUPS
1–4
MATRIX
.
MATRIX
- level controls.
1–4
MATRIX
1–4
MATRIX
MATRIX
module.
MASTER
MTX 1 IN TO ALL
input level controls.This way,a single external input
input jacks 2, 3 and 4 are
MATRIX
master HS module
.
1–4
MATRIX
-,
LEFT
input signals
MATRIX
input connectors are
input 1 jack to
MATRIX
5
p. 77