Changing/Reviewing Utility Settings; Utility Mode - Crest Audio X-Eight HS Owner's Manual

features

changing/reviewing utility settings

The settings can be accessed by entering
UTILITY
the different parameters can be changed to suit user's preferences. The
changes stay in effect until they are again modified by the user, or a
is performed which changes them all back to their default settings.
RESET

utility mode

1
Enter mode:
UTILITY
Press the
MICRO UTILITY
will stay in mode while this button is depressed.The
UTILITY
now shows the first parameter—uP of the parameter list.
2
Select a
PARAMETER
Use the / keys A to scroll through the list of available
UP DOWN
3
View the current setting
Press the I button.The
RECALL
to showing the
METER
4
Changing the setting
While the is showing parameter settings (not the parameter
DISPLAY
itself), the / keys will scroll through the list of possible settings
UP DOWN
for that parameter. Select the new-setting and press the
again.The will briefly show **** , the displayed setting will be acti-
DISPLAY
vated and the
DISPLAY
5
Exit mode
UTILITY
When finished, press-and-release the
returns to mode with the new-settings in place.
NORMAL
microprocessor muting system
button F, it is a latching switch, and the system
to edit
will change from showing the
DISPLAY
's current setting.
PARAMETER
will go back to showing the parameter.
MICRO UTILITY
mode.Once there,
UTILITY
SYSTEM
B
DISPLAY
.
PARAMETERS
-
PARA
button
RECALL
F key, the
MUTE SYSTEM
+
The only way to get
back to showing the
parameter is to press the
button—even if
RECALL
no-change is desired, the
button must be pressed.
RECALL
Make sure the display is
showing the desired setting
when is pressed. Then
RECALL
return to step-two above,
and continue to select and
change parameters.
7
p. 139