Cleaning The Thermal Head - Fujitsu FP-1000 User Manual

10-3. Cleaning the Thermal Head

(1) Be sure to turn off the printer power.
(2) Open the top cover.
(3) Using an alcohol solvent, remove black paper particles and other residue
from the surface of the thermal head.
Thermal Head
Caution: The thermal head can easily be damaged. Clean it carefully
Caution: The thermal head is still hot immediately after printing. Leave
Caution: The thermal head may be damaged by static electricity. Take
Caution: Wait until alcohol from the cleaning solvent has thoroughly
Caution: Use only alcohol or isopropyl alcohol solvents.
using a soft cloth to avoid any damage.
it to cool for about ten minutes before cleaning.
care to avoid exposing it to static electricity.
dried before turning on the printer power.
− 65/83 −