Connecting The Ac Adapter And Cable - Fujitsu FP-1000 User Manual

4-4. Connecting the AC Adapter and Cable

Standard Model
(1) Connect the cable connector of the AC adapter to the power connector.
AC Adapter
Connector
Warning: Use the specified AC adapters.
Warning: Use only the specified AC power cable with specifications based on
national regulations.
Caution: Before connecting the AC adapter, turn off the power switches on
the printer and all the devices connected to the printer. Also,
remove the plug of the AC adapter power cable from the outlet.
Caution: Perform the adapter connection with the device placed vertically for
easy operation.
Caution: As the connector is clipped in place after insertion in order to
prevent it from falling off, when performing insertion, (1) grip the
cable base with one hand, (2) slide the outer part of the connector
upwards with the other hand (3) and push in until it locks into place.
Cable Base
(1)
The Outer Section of the Connector
(2)
Power Connector
Flat Side
Cable Connector
Power Cable
− 12/83 −
AC Adapter
AC Inlet
(3)