Power Specifications - Fujitsu FP-1000 User Manual

11-5. Power Specifications

(1) Standard Model
Operating Voltage:
Operating
Power Consumption: During standby:
(2) Built-in Power Supply Model
Rated Input Voltage: 100-240V, 50-60Hz
Rated Input Current: 1.1A
Power Consumption: During standby:
Note: Drawer Kick Drive Current: Max. 1A
However, do not operate two drawer kick at the same time.
Power Connector Pin Assignment
Pin No.
1
2
3
Warning: Use the specified AC adapter for the power supply.
24V
Current 1.5A
:
During operation: 38W or less /1.5A
During operation: 38W or less /1.5A
Signal Name
+24V
SG
N.C
(If our AC adapter is not used, problems such as bad print
quality, electromagnetic interference, or circuit noise may
occur.)
±10%
3.0W or less/0.1A (Dual Interface)
4.5W or less/0.1A (LAN Interface)
(at 25°C, print density setting 100%, paper width
80mm, print duty 9%)
3.0W or less/0.1A (Dual Interface)
4.5W or less/0.1A (LAN Interface)
(at 25°C, print density setting 100%, paper width
80mm, print duty 9%)
− 74/83 −
3
1
2