Triumph Tiger Sport Owner's Handbook Manual page 35

Press and release the MODE button on
the instrument housing until the desired
riding mode is flashing in the display.
1
1. Current (active) riding mode
2. Selected riding mode (flashing)
The selected riding mode is automatically
activated if within 30 seconds of pressing
the MODE button the following has been
carried out simultaneously:
• Close the throttle.
• Pull the clutch in.
• Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
is shown and the previous mode is no
longer shown.
2
1. Selected riding mode
Resume riding as normal.
Note:
• If any one of the systems (MAP, ABS
or TTC) fails to change to the
settings specified by the selected
riding mode, both the previous and
the selected riding mode icons will
flash.
1. Incomplete mode change (flashing)
General Information
1
1
35