Warranty - Haussmann HCN45R Operating Manual

PROBLEM
Tool runs slowly or has
power loss
Fasteners are jammed
!
TROUBLESHOOTING
CAUSE
Tool dry, lacks lubrication
Spring in cylinder cap is damaged
Foreign matter between piston assembly
and cylinder
Cylinder is not assembled in the home
position
O-ring on the valve is dry after disassembly Lubricate. Reassemble
Air pressure is too low
Driver blade is worn
Inner diameter of air supply hose is too
small
Fasteners are wrong size
Welded collating wires in nail coil broken
WARNING: Repairs should be made by an authorized repair centre.

WARRANTY

Thank you for investing in a HAUSSMANN power tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of
your tool (failure, missing part, etc.), please contact one of our service technician
at our toll free service line at 1-866-599-5916 Ext 2 from 8 AM to 6 PM, Monday
to Friday, Eastern time. RONA reserves the right to repair or replace the defective
tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair other than by an authorized agent. Heavy-
duty, daily professional or hire usage are not guaranteed. Due to continuous
product improvement, we reserve the right to change the product specification
without prior notice.
SOLUTION
Use air tool lubricant
Replace spring
Disassemble / clean / lubricate
Reassemble after disassembling
Raise pressure (not more than 120 PSI)
Replace piston assembly
Use larger diameter hose
Use recommended fasteners
Stop using
21