Table of Contents
Advertisement
The wizard is complete when the congratulations screen displays.
The Next Step
The next step depends on the deployment. Once all
a copy of the
system image
Page | 39
4. Timeout – the default is usually sufficient, but the duration the appliance will
try to connect to the RADIUS server can be customized as necessary.
5. Score – the default is usually sufficient, but customize the initial respons-
iveness score as necessary.
6. Port – the default is UPD 1812 for authentication. Legacy RADIUS servers
may use 1646.
7. Always use the same message authenticator – select if the attribute
Request must contain the Message Authenticator attribute has been con-
figured on the RADIUS server.
to preserve initial configuration is recommended.
features
for the deployment are configured, saving
E Series Installation Guide
Advertisement
Table of Contents
