Rack The Appliance - Celestix cloud edge Installation Manual

Work Folders
Application server
RADIUS server
RADIUS clients
Bold items are required

Rack the Appliance

Celestix appliances are either 1U or 2U and should be attached to a standard 19-inch equipment rack
as follows.
Note: If the appliance came with slides instead of brackets, see the instructions included in the slide
packaging for the rack mounting procedure.
Caution:
Do not place the appliance on the floor.
l
Keep it in an upright position.
l
Place it in a well-ventilated area that is out of direct sunlight.
l
1. Select a secure location where only authorized personnel can access the appliance.
2. Mount the appliance to the rack:
a. Use all the provided screws to attach mounting hardware to the front right and left sides
of the appliance.
Page | 16
RD Connection Broker (domain joined)
IP address
Hostname
Remote Desktop Virtualization Host server
(optional)
IP address
Hostname
Firewall rules
Sync share name
SSL certificate
AD security group for user accounts
Sync share DNS entry (recommended)
IP address
Hostname
IP address
Hostname
IP address
Hostname
Used in IG: Configure Features > Work Folders Setup Wiz-
ard .
May be needed in post-configuration for:
Web Application Proxy
Remote Desktop Gateway
RD Web Access
May be needed to set up Remote Access with VPN or NPS.
May be needed to set up Remote Access with VPN or NPS.
E Series Installation Guide