Table of Contents
Advertisement
To access feature configuration
1. Click a feature name link in the list.
2. If necessary, confirm the RDP application download.
3. Open the application.
4. Enter administrator credentials for the appliance when prompted.
Important: When the E Series is joined to an AD domain, a valid domain administrator account
is required for logon.
5. If a self-signed certificate is used, accept the certificate when prompted.
6. The console opens as a Remote Desktop Connection.
7. Configure settings as needed.
8. When done, navigate to File|Exit in the remote desktop window to close and return to the
Maintenance screen. Closing the application logs off the RDP session to the appliance and is
recommended to release management resources.
Note: If the File menu is not visible, use the quick close button.
The Next Step
Once Remote Access features are installed, the next step depends on the deployment. Some features
require configuration; these instances are noted in the
additional configuration is done, saving a copy of the
recommended.
Page | 32
Feature Details
described above. Once any
system image
to preserve initial configuration is
E Series Installation Guide
Advertisement
Table of Contents
