Quick Setup Wizard - Celestix cloud edge Installation Manual

The factory default local administrator credentials are:
User name: administrator
Password: [Celest1x]
The password is case-sensitive and the brackets are included. The "domain\administrator" user name
format may be required.
Important: A certificate warning may display because the site uses a self-signed certificate. Accept
the certificate to access the web UI.

Quick Setup Wizard

While working through the wizard to configure General Settings, the appliance may need to reboot.
1. Administrator Password – the default local administrator password should be changed as a
security precaution because it is public knowledge. However, once the appliance has been joined
to the internal domain, domain administrator credentials must be used to access features.
User name – the Administrator Password feature only changes the local administrator
n
password, which must be the logged in account.
Password – enter and confirm a new password. Complexity requirements are noted on
n
the screen.
2. Date and Time – use onscreen controls to enter the date, time, and time zone, then configure
for daylight savings if necessary.
3. Network Interfaces – if DHCP was used initially to assign an IP address, select the LAN network
adapter to set a static address. A static address includes these settings:
Internet Protocol (IP) address
n
Subnet mask
n
Gateway address
n
Automatic or preferred DNS server
n
4. Hostname and Domain
Note: Fields will be autopopulated with available settings if the appliance was joined to the
domain previously; the reboot will be skipped if they are left unchanged.
Hostname – specify a name for the appliance; it must be unique.
n
For example: cesa
Domain – enter the name for the internal domain the appliance will join.
n
For example: example.com.
Page | 24 E Series Installation Guide