Front Panel Controls Overview
The front panel contains an LED display and Jog Dial. These controls show system information and
allow direct management for some settings on the appliance. At a minimum, they power on/off the
appliance and provide access to retrieve or set IP addresses.
Front Panel Display
The front panel display operates in two modes:
Idle mode – the default mode; status screens cycle through display.
l
Configuration mode – pressing the Jog Dial to enters configuration mode; the
l
ation
section explains functionality.
Jog Dial Operation
The Jog Dial on the appliance front panel is used to navigate the LED display to perform on-screen
commands.
Turn to scroll through options.
l
The square brackets cursor [ ] scrolls through items
n
on the screen when the front panel display is in
configuration mode.
The following example shows the Add option
selected by the cursor:
The angle brackets cursor > < allows editing after a selection when the front panel display
n
is in configuration mode.
The following example shows the Delete option selected by the cursor:
Press to select options.
l
Power the Celestix Appliance
Connect power and turn on the appliance.
Page | 19
[ Add ]
> Delete <
Jog Dial Oper-
E Series Installation Guide