Table of Contents
Advertisement
b. Advanced – define client parameters and assign the appliance network adapter that Dir-
ectAccess service will use.
i. Installation type – select the DirectAccess functionality to deploy:
ii. Client Group – designate an AD security group that will manage devices that con-
nect through DirectAccess; leave blank to include all remote devices.
iii. Internal – specify the internal network adapter in the drop menu.
c. GPO and NLS
i. Group Policy Object (GPO) – leave blank to configure the default options, otherwise
designate predefined AD policy groups that will manage settings for devices and
servers.
ii. Network Location Server – the NLS server will be installed on the appliance unless
an external server is designated.
2. Finish – review the settings; click Next to configure.
Configure VPN services only – select to add access through a VPN connection.
Note: VPN should be enabled to support unmanaged clients.
1. VPN
a. Address Assignment
i. Assign addresses automatically – use DHCP to assign client addresses.
ii. Assign addresses from a static address pool – enter a range of IP addresses that
RRAS will assign to clients when they connect to the network.
b. Authentication
i. Use Windows Authentication – use AD to authenticate users.
ii. Use RADIUS Authentication – configure VPN connections to use RADIUS authen-
tication.
Page | 38
Full DirectAccess installation – bidirectional tunnels for remote client
l
access and management.
Client management only – configure tunnel for remote client management.
l
1. Client GPO – specify the name for the AD policy that will manage client
access.
2. Server GPO – specify the name for the AD policy that will manage access to
the DirectAccess server.
1. NLS Certificate – if an SSL certificate will be used, navigate to and select it.
2. NLS URL – if an external NLS server is deployed, enter the HTTPS URL.
Enter the start and end IP addresses to define the range.
1. Radius Server – designate the server name or IP address.
2. Shared Secret – create a secret to authenticate communication between the
appliance and RADIUS server.
3. Confirm – confirm the shared secret.
E Series Installation Guide
Advertisement
Table of Contents
