Removing The Computer Cover - Lenovo S500z Hardware Maintenance Manual

6. Insert the two tabs
cover. Then, pivot the UltraFlex II Stand downward and install the screw to secure the UltraFlex II
Stand to the computer.
Figure 25. Installing the UltraFlex II Stand

Removing the computer cover

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
CAUTION:
Before you open the computer cover, turn off the computer and wait several minutes until the
computer is cool.
To remove the computer cover, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer stand. See "Replacing the computer stand" on page 89.
3. Unlock any locking device that secures the computer cover.
94
Lenovo S500z Hardware Maintenance Manual
1 on the new UltraFlex II Stand into the corresponding holes in the computer