Pittasoft BLACKVUE LCD Quick Manual page 10

Installation
1
In a bright and safe place, stop the vehicle engine and pull out the vehicle
key.
2
Attach the front view camera on the vehicle windshield glass with double-
sided tape.
3
Attach the lens of the rear view camera on the vehicle's back window with
double-sided tape, so that the lens can also be placed at the center of the
vehicle.
4
Connect the V in terminal of the front view camera to the V out terminal
of the rear view camera by using the cable for connecting to the rear view
camera.
5
Use the power cable to connect the DC in of the front camera to car's power
socket.
Note
y It is necessary to use Power Magic (the Battery Discharge Prevention
Device) to record video while the car is parked.
y To use BlackVue with other equipment that uses a power cable, purchase
and use a dual power outlet adaptor.
BLACKVUE LCD I 9