Advertisement
AMP CAN CONTROL PANEL
A
G
A. GUITAR INPUT - Plug your guitar
in here. This is a 1/4 inch, high imped-
ance input for electric guitars.
B. GUITAR VOL - Adjusts the loud-
ness of the GUITAR input channel.
C. GAIN - This "push-push" switch
selects between low and high gain for
the guitar input channel.
gain, the switch should be pushed in.
D. GUITAR TONE - Adjusts the tone
and brightness of the guitar input
channel. 10 is the brightest setting
becoming progressively less bright as
the dial is rotated towards 1.
E. POWER LED - Illuminates green
when your Amp Can is on. If the LED
glows red momentarily while playing,
this is an indication that it is almost
time to recharge the battery. Once the
power LED stays red, the battery
should be recharged.
F. POWER - This switch is used to
B
C
D
I
H
turn the unit ON and OFF. When your
Amp Can is OFF, no power is drawn
from the battery. If the adapter is con-
nected, the charging circuitry is
enabled .
G. MIC INPUT - This is a 1/4 inch,
high impedance input for a micro-
phone or acoustic-electric guitar.
For high
H. MIC VOL - Adjusts the loudness of
the MIC input channel.
I. MIC TONE - Adjusts the tone and
brightness of the mic input channel.
10 is the brightest setting becoming
progressively less bright as the dial is
rotated towards 1.
J. CHARGER - The external "wall-
mount" adapter connects here to
charge the battery.
K. CHARGE LED - Illuminates green
when your Amp Can's battery is
charging.
4
E
F
K
J
Advertisement
