To Change Heating Methods; Indoor Temperature (Space Heating Mode); Installation Requirements; Wrong Installation Places - Rinnai WF-100W_EU User Manual

To change heating methods.

The user can choose among two different heating methods.

Indoor temperature (Space heating mode)

• A temperature sensor attached to remote controller detects temperature of the
room to maintain constant indoor temperature. When the user configures temperature
inside the room, the boiler operates according to temperature setting.
(Default option of this product at the time of purchase is indoor temperature heating.)
Floor heating (Flow temperature mode)
• The Wi-Fi Remote controller allows the user to set the water flow temperature for
the heating system.

Installation requirements

• Install the remote controller 1.5 m off the floor, far from external doors and windows.
• The best position to install the remote controller is on an inner wall, without obstacles
around.

Wrong installation places

• In a place where the sun can shine directly on the remote controller.
• On a cold outside wall (provide insulation material behind the remote controller).
• Above a heat source such as a radiator, lamp or television.
ⓐ
Press (switch heating method) button to
change heating method.
Heating method cannot be switched in
auto mode.
Please press the button after releasing
auto mode.
Start heating by indoor
temperature. (When switched to
Space heating mode)
Start heating by heating water
temperature. (When switched to
Flow temperature mode)
ⓐ
9