Table of Contents
Advertisement
To use outing
ⓑ
ⓐ
1.
Press ⓐ (outing) button .
Liquid crystal display when [Indoor temperature
heating] is used with outing
Outing mode is enabled.
• When the Outing mode is activated
heating is stopped for 4 hours and
CH set temperature cannot
be modified. The boiler enters a 4h
loop as long as the function is
enabled. After 4 hours the boiler
ignites and operates for 10 min at a
flow temperature of 50°C only if the
heating system temperature is
below 25°C. again during
Liquid crystal display when [Floor heating]
is used with with outing
Outing mode is over.
For short periods of absence, this mode allows to reduce fuel consumption
and keeps the heating system warm and ready for the following activation.
18
Hide quick links:
Advertisement
Table of Contents
