Correct method of use
Turning temperature controller ON / OFF
ⓒ
1.
Temperature controller is turned ON to operate the boiler by pressing
ⓐ (power) button.
2.
Press ⓐ (power) button again to turn temperature controller OFF.
To set current time
1.
Press ⓑ (mode / setting) button for 3 seconds or longer.
Please set present time.
2.
When hour digits flicker, use ⓒ (increase heating temperature or
decrease heating temperature) buttons to set current hour and press
ⓑ (mode / setting) button.
3.
When minutes digits flicker, use ⓒ (increase heating temperature or
decrease heating temperature) buttons to set current minutes.
4.
Press ⓑ (mode / setting) button to finish time setting.
Time setting is completed.
Time can only be set when heating and hot water mode are turned OFF.
Incorrect time will be displayed upon initial power connection and after long-term
power failure. Follow the instructions above to set current time.
Please set the time for proper use of timer function.
When smart phone function is used, current time is automatically set.
Indoor temperature controller
ⓐ
ⓑ
7