Rinnai WF-100W_EU User Manual page 25

Correct method of use (application)
4.
Enter ⓐ(User Nickname),
ⓑ(Password), ⓒ(Question and
answer to find lost password),
and press ⓓ to scan the boiler
QR code, then press
After pressing the button , check
the informations collected through
QR code: in particular verify the type
of gas used. In case it is required,
proceed with a manual introduction
of data.
※ Password must be at least 4
characters long.
5.
Press ⓐ (Wi-Fi) button of
temperature controller for 3 seconds
to enter registration mode.
Registration can only be done when
heating and hot water are turned OFF
on temperature controller.
6.
Check the 4-digit unique ID
displayed on the display window
of temperature controller.
• Registration mode is turned OFF after
10 minutes.
• The following letters and numbers can
appear on temperature controller.
Letters :
Numbers :
Please run the Rinnai boiler application
and choose thermostat ID.
(OK).
ⓔ
ⓓ
ⓐ ⓐ
ⓑ ⓑ
ⓒ ⓒ ⓒ
ⓓ ⓓ ⓓ
AUTO SCAN QR CODE
ⓔ ⓔ ⓔ
ⓐ
4-digit unique ID
25