Installing Batteries - HoMedics BPA-730-CA Instruction Manual And Warranty Information

Automatic arm
Table of Contents

Advertisement

Available languages

Available languages

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open
2. Install or replace 4 "AAA " LR03 sized batteries in the
3. Close the battery cover by pushing in the top end of the
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only 1.5V
AAA LR03 alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
15-0144 BPA-730-CA_IM_v4--02.indd 11
the battery compartment.
battery compartment according to the indications inside
the compartment.
battery door.
Battery
Cover
11
2015/10/28 下午6:14

Advertisement

Table of Contents
loading

Table of Contents