HoMedics BPA-730-CA Instruction Manual And Warranty Information page 19

1. With the cuff wrapped around your arm, press the START/STOP button.
2. After all symbols disappear, the display will
3. When the measurement is completed, the cuff will
Note:
• This monitor automatically turns off approximately 1 minute after last
operation. You may also press the START/STOP button to turn the unit
off.
• To interrupt the measurement, you may press the START/STOP
(recommended), MEMORY or Date/Time Set (
cuff will deflate immediately after a button is pressed.
15-0144 BPA-730-CA_IM_v4--02.indd 18
Do not inflate the cuff unless it is wrapped around your arm. All digits will
light up to check the display functions. The checking procedure will be
completed after about 3 seconds.
MEMORY
START
STOP
show "00". The monitor is "Ready to Measure"
and will automatically inflate the cuff to start
measurement. The cuff will then begin deflating
as measurement continues.
Note:
This monitor will re-inflate automatically if the system detects
that your body requires more pressure for measurement.
deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.
) buttons. The
18
2015/10/28 下午6:14