Medisana 52345 Instruction Manual page 68

GB 8 Operation via Internet (WAN)
Operation via Internet (WAN)
For safety reasons the NAT-firewall normally blocks the access to your SBM from the
internet (WAN). If you want to allow the access to your SBM via internet, you need to
adjust your firewall accordingly.
As there are many different kinds of routers available on the market, we recommend to
consult your router instruction manual to learn how you can set-up a port forwarding
(or virtual server as it is called sometimes). Check out the router manual for these terms
and follow the instructions given. The below example refers to a router of the brand
"Fritz!Box" (Model 7390):
1. After you logged in to your
router, choose „Internet".
2. Select „Enable".
3. Now click the button
"New Portforwarding"-
in the lower right area.
4. In the drop-down box se-
lect "Other applications"
under "Activate portfor-
warding for". Enter the
name of your SBM in the
field "Description" (e.g.
"Smart Baby Monitor 3G").
5. In the drop-down box select
"TCP"-protocol. Enter the
port no. 80 in the fields
"from port", "to port" and
"at port". In the field "at
computer" you should
select (via drop-box) "ma-
nual input of IP-address".
Enter the IP-address of
your SBM device (e.g.
192.168.1.75) in the field
"IP-address". Navigate to
Settings -> Cameras -> "my SBM" -> address in the app to see the IP-address.
Confirm the settings by pressing "OK". The router setup for using the 3G connec-
tion is now complete.
28
GB
G