Getting Started - Medisana 52345 Instruction Manual

3.1 Connecting the SBM to your router

1. Connect antenna
2. Connect the network cable to your router and the SBM (router not included).
3. Connect the included power adaptor
® ®
iPod touch iPhone
®
PC or Mac
®
iPad
3.2 Install the free Smart Baby Monitor app
Launch the Apple App Store on your Apple device and search for "medisana" and install
the Smart Baby Monitor app. Alternatively, you may scan this QR code to directly
access the app:
After installation, the corresponding app symbol will be shown on the display of your
Apple device:
3.3 Launching the app
Ensure that your iPhone , iPad or iPod touch is connected to the same (wireless)
network as your SBM. Start the app and follow the instructions (please check chapter
4.2 First start of the app regarding the installation of the WiFi-network).
3.4 Disconnecting the network cable
After setting up the wireless connection (Wi-Fi) you can detach the network cable. You
can now use your SBM with your wireless network.
NOTES
Your Apple device needs to have iOS version 5.0 or later installed for
proper installation. To download the software, you need an Apple ID with
an e-Mail address and a password, as well as an active internet connec-
tion. Downloading the software may be subject to charges from your
provider.

to the antenna jack

.
Internet
Modem
Router
Network cable
® ®

3 Getting Started

and tighten it.
3. Power adaptor
2. Network cable
®
GB
1. Antenna
G
G
G
5
GB