Conversion Value For Integral Export Power; Temperature - Panasonic kw9m User Manual

5.1.12 Conversion value for integral export power

・The conversion value for the present integral export active power (-P) is displayed.
(Only total conversion value is displayed for 3P3W.)
・Press <SHIFT/▽> to change total, phase 1 (1
<1P2W/1P3W/3P4W>
Total
<3P3W>
Total
*The conversion value exceeds "99999999", "－－－－－－－－" is displayed.

5.1.13 Temperature

・The present temperature is displayed.
・Temperature measuring function is the simple function Use this only to check temperature trend
and do not use for control.
・It measures by built-in thermistor, therefore it differs the measuring value according to the internal
circuit conditions (communication, input current). Use it for your reference.
・When the temperature of the front is much different from the temperature of installed panel, when
it cools inside the panel, it is impossible to measure correctly. Use the temperature correction
function in order to adjust the temperature and use only to check temperature trend.
st
st
Phase 1 (1 circuit)
nd
circuit), phase 2 (2 circuit) and phase 3 (3
nd
Phase 2 (2 circuit)
38
KW9M Eco-POWER METER
rd
circuit).
rd
Phase 3 (3 circuit)