Electricity Charge; Carbon Dioxide Conversion Value - Panasonic KW1M Eco-Power METER User Manual

・When input voltage is under 5% of rating, it displays "0.0" and doesn't measure.
("Under 5%" means the value getting from this calculation "rated voltage 200(400) x 0.05 x VT ratio".)
・When input voltage exceeds 150%F.S. at each range, 「
・Voltage measurement parts
Eco-POWER METER measures the voltage as below.
<AKW1111 (400VAC applicable type)>
Display
System
Single-phase two-wire
Single-phase three-wire
Three-phase three-wire
Three-phase four-wire
<AKW1110>
Display
System
Single-phase two-wire
Single-phase three-wire
Three-phase three-wire

3.2.5 Electricity Charge

It displays the standard electricity charge for the integrated electrical power.
・Press <ITEM>key to display the electricity charge.
Sample

3.2.6 Carbon dioxide conversion value

It displays the standard conversion value for the integrated electrical power.
・Press <ITEM>key to display the conversion value.
R-V / RS-V
R-voltage (P1-P0)
(line voltage)
R-voltage
(phase voltage)
RS-voltage (P1-P0)
(line voltage)
R-voltage
(phase voltage)
R-V / RS-V
R-voltage (P1-P0)
(line voltage)
R-voltage
(phase voltage)
RS-voltage (P1-P0)
(line voltage)
Sample CO conversion value (kg-CO
2
‐ ‐ ‐ ‐ ‐ ‐
S-V / RT-V
(Skip)
(Skip)
RT-voltage(P1-P2)
(line voltage)
S-voltage
(phase voltage)
T-V / TS-V
(Skip)
T-voltage
(phase voltage)
TS-voltage (P2-P0)
(line voltage)
＊When the value exceeds '999999',
‐ ‐ ‐ ‐ ‐ ‐」
「
)
2
＊When the value exceeds '999999',
‐ ‐ ‐ ‐ ‐ ‐」
「
7
KW1M Eco－POWER METER
」 will be displayed.
T-V / TS-V
(Skip)
T-voltage
(phase voltage)
TS-voltage (P2-P0)
(line voltage)
T-voltage
(phase voltage)
will be displayed.
will be displayed.