Yamaha SHVO Owner's Manual page 55

Average speed/Tripmeter modes
Average speed and distance traveled are re-
corded once the "START/STOP" button is
pushed to start the measurements, regard-
less of the current display.
TIP:
The measurements are performed only while
the engine is running.
The measurements are not saved if the en-
gine is stopped. The measurements are reset
automatically when the displays go off 25
seconds after the engine stops.
1 "START/STOP" button
2 "MODE/RESET" button
To start the measurements:
Push the "START/STOP" button for less than
1 second. The beeper sounds once and the
measurements start.
To stop the measurements:
Push the "START/STOP" button for less than
1 second while the measurements are being
recorded. The beeper sounds once and the
measurements stop.
To restart the measurements:
Push the "START/STOP" button for less than
1 second while the measurements are
stopped. The beeper sounds once and the
measurements restart.
To reset the measurements:
Push the "MODE/RESET" button for at least
2 seconds while the measurements are
Instrument operation
stopped. The beeper sounds twice and the
measurements are reset.
1
2
49