Yamaha SHVO Owner's Manual page 49

Table of Contents

Advertisement

TIP:
The hour meter is selected at the Yamaha
factory.
1 Hour meter/voltmeter
Hour meter
The hour meter shows the total number of
hours that the engine has been running since
the watercraft was new.
TIP:
The elapsed time will be kept even if the bat-
tery terminals have been disconnected.
To switch to the hour meter from the voltme-
ter:
Push the "VOLT/HOUR" button for at least 1
second after the multifunction information
center is activated for more than 10 seconds.
The display switches to the hour meter from
the voltmeter.
1
1 "VOLT/HOUR" button
2 Hour meter
1
2
Instrument operation
Voltmeter
The voltmeter shows the battery voltage.
When the battery voltage is normal, the volt-
meter displays approximately 12 volts.
If the battery voltage has dropped significant-
ly, "LO" is displayed on the voltmeter. If the
battery voltage has risen significantly, "HI" is
displayed. If "LO" or "HI" is displayed, imme-
diately return to shore and have a Yamaha
dealer service the watercraft.
To switch to the voltmeter from the hour me-
ter:
Push the "VOLT/HOUR" button for at least 1
second after the multifunction information
center is activated for more than 10 seconds.
The display switches to the voltmeter from
the hour meter.
1
1 "VOLT/HOUR" button
2 Voltmeter
EJU31515
Fuel level meter
The fuel level meter shows the amount of fuel
remaining in the fuel tank. The amount of re-
maining fuel is shown using eight display
segments, which disappear two at a time as
the fuel level decreases.
2
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Waverunner fx shvo 2015Waverunner fx cruiser svho 2015

Table of Contents