No-Wake Mode - Yamaha SHVO Owner's Manual

To deactivate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds two times and
the "UNLOCK" indicator light blinks two
times, then comes on, the "L-MODE" indica-
tor light goes off and the Low RPM Mode is
deactivated. When the Low RPM Mode is de-
activated, the watercraft returns to the nor-
mal operation mode.
EJU42483

No-wake mode

The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds. This
function can be used only for forward water-
craft operation or when the watercraft is in
neutral.
TIP:
The no-wake mode can only be activated

after 5 seconds have elapsed since starting
the engine.
If the no-wake mode is activated when the

watercraft is operating in neutral, the re-
verse gate will move to the forward posi-
tion.
Activating and deactivating the no-wake
mode
Activation of the no-wake mode will be con-
firmed by the number of beeps when the
"NO-WAKE MODE" switch is pushed, and by
the digital speedometer display of the multi-
function information center. (See page 40 for
information on the multifunction information
center.)
Number No-wake mode oper-
of beeps
Activated
Deactivated
Digital
speedome-
ation
ter display
Starts
blinking
Stops
blinking
Watercraft operation
TIP:
The beeps and the blinking digital speedom-
eter display also indicate the activation of the
cruise assist. (See page 38 for information on
the cruise assist.)
To activate the no-wake mode:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Push and hold the "NO-WAKE MODE"
switch. Once the beeper sounds three
times quickly and "8" (when kilometers
are selected) or "5" (when miles are se-
lected) starts blinking in the digital
speedometer
mode is activated. Keep the throttle lever
in the fully closed (idle) position when the
no-wake mode is activated.
TIP:
The digital speedometer display blinks con-
tinually while the no-wake mode is activated.
1 "NO-WAKE MODE" switch
display, the no-wake
1
37