Disassembly - Isuzu A-4JA1 Workshop Manual

These disassembly steps are based on the A-4JA1 engine.
21
16
Disassembly Steps - 1
1. Cooling fan and spacer
2. Cooling fan drive belt
3. Cooling fan drive pulley
4. Alternator and adjusting plate
5. Fuel pipe (Fuel filter to
injection pump)
6. Fuel pipe (Fuel filter to feed pump)
7. Fuel pipe (Fuel filter leak off)
8. Fuel filter
9. Oil pipe (Injection pump to cylinder
body)
10. Rear engine hanger
20 18
17 19 4 2

DISASSEMBLY

3 7 8 5
1 6
11. Fuel leak off pipe
12. Fuel injection pipe with clip
13. Injection pump
14. Intake manifold
15. Starter
16. Oil filter
17. Oil pressure switch
18. Cooling water rubber hose
19. Cooling water intake pipe
20. Front engine hanger
21. Exhaust manifold
ENGINE ASSEMBLY ( 1 )
13 14 12
9 15
11
10
31