Pulley And Fan; Rotor And Bearing; Front Cover; Rectifier With Brush Holder - Isuzu A-4JA1 Workshop Manual

ENGINE ELECTRICALS
1
2
1
166
1
2
2
2
1
Important Operations

3. Pulley and Fan

(1) Clamp the rotor shaft in a soft jaw vise.
(2) Loosen the pulley lock nut 1.
(3) Remove the pulley 2 along with the spacer
collar.

4. Rotor and Bearing

(1) Use a plastic hammer or a press 1 to remove
the rotor from the front cover 2.
(2) Remove the spacer collar.

8. Front Cover

Use screwdrivers to pry the front cover 1 from the
stator 2.
Note:
Do not attempt to pry the coil wires from the stator.
9. Stator

10. Rectifier with Brush Holder

Use a soldering iron 1 and a pair of long nose pliers
2 to remove the rectifiers.
Note:
Hold the rectifier leads between the rectifier and the
soldering iron with the long nose pliers. This will
protect the rectifier from the heat.