Printing A Test Label - Paxar 9855 Operator's Handbook Manual

Line one lists the printer model number (M9855) and line two gives
the version of software in the printer.
P r i n t i n g a Te s t L a b e l
1. From the Diagnostics Menu, press l or r until you see
2. Press Enter/Pause and r until you see
3. Press Enter/Pause. The following test labels print.
The first label shows the printer's configuration by packet (A-G).
The second label shows the model number, software version,
stock count, voltage, print contrast, printhead resistance, number
of bad dots, and installed options. The test label also shows an
inch count for the high energy ribbon. This information will help
Technical Support diagnose the problem. Refer to the optional
Packet Reference Manual for more information about the test label.
You can also print a test label by pressing l and r at the same
time. Hold for one second and release. If test labels do not print,
call Technical Support.
10-2 Diagnostics & Troubleshooting
DIAGNOSTICS
l
User Diag
USER DIAG
l
Test Label
r