Loading Supplies - Paxar 9855 Operator's Handbook Manual

L O A D I N G S U P P L I E S
This chapter describes how to load:
N
a roll of supply
N
fan-fold supply
N
a roll of tag supply.
There are three types of supplies:
Thermal Direct
Thermal Transfer
High Energy
If you are using thermal direct supplies, do not load a ribbon.
If you switch from black mark to die cut supplies, make sure the
printer's supply type is set correctly. See "Supply Type" in Chapter
4 for more information. Your System Administrator can also send
the supply setup packet to change the supply type. Refer to the
optional Packet Reference Manual for more information about
sending the supply setup packet.
specially treated thermal supplies that do not
use a ribbon for printing.
standard supplies that require a ribbon for
printing.
scratch, chemical, and temperature resistant
supplies that require a ribbon able to
withstand high temperatures. See "Using a
High Energy Ribbon" in Chapter 3 for more
information.
2

Loading Supplies 2-1