Boot Sector Virus Protection - ROHS EmETXe-i9652 User Manual

Type the password, up to eight characters in length, and press <Enter>.
The password typed now will clear any previously entered password from
CMOS memory. You will be asked to confirm the password. Type the password
again and press <Enter>. You may also press <ESC> to abort the selection
and not enter a password.
To disable a password, just press <Enter> when you are prompted to
enter the password. A message will confirm the password will be disabled.
Once the password is disabled, the system will boot and you can enter Setup
freely.
When a password has been enabled, you will be prompted to enter it
every time you try to enter Setup. This prevents an unauthorized person from
changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the BIOS
to request a password every time your system is rebooted. This would prevent
unauthorized use of your computer.
You determine when the password is required within the BIOS Features
Setup Menu and its Security option. If the Security option is set to "System",
the password will be required both at boot and at entry to Setup. If set to
"Setup", prompting only occurs when trying to enter Setup.

Boot Sector Virus Protection

Enable/Disable Boot Sector Virus Protection.
PASSWORD DISABLED.
- 42 -
BIOS