Huawei Quidway S2700 Series Quick Start Manual page 34

Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start
As shown in
the mode switching button once, the mode indicator turns green and the related interface indicator
enters the speed state. When you press the mode switching button for a second time, the mode
indicator turns red and the related interface indicator represents the stack status. When you press
the mode switching button for a third time, the mode indicator restores to the default state (off).
If you do not press the mode switching button within 45 seconds, the mode indicator
automatically restores to off. The following table describes the meanings of indicators.
Table 2-15 Description of indicators in different modes
Display Mode
STAT
Speed
PoE
Stack
Issue 01 (2011-10-26)
Figure 2-10, the button marked "5" is the mode switching button. When you press
Status
Off
Green
Blinking green
Off
Green
Blinking green
Off
Green
Blinking green
Off
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Product Hardware Introduction
Description
The interface is not connected or
has been shut down.
The interface is connected.
The interface is sending or
receiving data.
The interface is not connected or
has been shut down.
The interface speed is 10/100
Mbit/s.
The interface speed is 1000 Mbit/
s.
The interface does not provide
remote power.
The interface is providing remote
power.
l The power of the powered
device (PD) exceeds the power
supply capability of the port or
exceeds the threshold.
The stack ID of the member
switch is not the number of the
interface in the off state.
29