Huawei Quidway S2700 Series Quick Start Manual page 41

Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start
No.
4
As shown in
the mode switching button once, the mode indicator turns green and the related interface indicator
enters the speed state. When you press the mode switching button for a second time, the mode
indicator turns red and the related interface indicator represents the stack status. If you do not
press the mode switching button within 45 seconds, the mode indicator automatically restores
to off. The following table describes the meanings of indicators.
NOTE
Table 2-19 Description of indicators in different modes
Display Mode
STAT
Issue 01 (2011-10-26)
Indicator
Mode
indicator
Figure 2-14, the button marked "5" is the mode switching button. When you press
PWR1 is at the side of the chassis.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Identifier Status
Blinking green
Red
MODE Off
Green
Red
Status
Off
Green
2 Product Hardware Introduction
Description
The system is
operating properly.
After registering, the
system does not
operate properly, or a
power alarm, fan
alarm, or temperature
alarm is generated.
The service interface
indicator is in the
default mode
(STAT).
The service interface
indicator indicates the
interface speed. After
45 seconds, the
service interface
indicator
automatically restores
to off.
The service interface
indicator indicates the
stack ID. After 45
seconds, the service
interface indicator
automatically restores
to off.
Description
The interface is not connected or
has been shut down.
The interface is connected.
36