S5700 Indicator Description - Huawei Quidway S2700 Series Quick Start Manual

Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start
Display Mode

2.7 S5700 Indicator Description

This section describes the indicators on the S5700 front panel.
Indicators of a Non-PoE S5700
S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-48TP-SI-AC, S5700-48TP-SI-DC and
S5700-6TP-LI-AC are non-PoE switches, and each of them has a single power supply unit.
NOTE
Figure 2-10 S5700-24TP-SI-AC indicators
Issue 01 (2011-10-26)
Only S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-48TP-SI-AC and S5700-48TP-SI-DC have
redundancy power supply (RPS) indicators.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Green
Blinking green
2 Product Hardware Introduction
Description
The device is a not a command
switch:
l If the indicator of an interface
is always on, the number of
this interface is the stack ID of
the device.
l If the first nine interface
indicators of the device are
always on, the stack ID of the
device is 0.
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
1
5
2
3
4
24