Upnp Settings - Qvis EYE-4MP-FG/W Installation & Network Connection Manual

7.5.4

UPNP settings

See Figure 26 for the "UPNP Setting" interface:
Auto-mapping of port; when the IP camera is connected to a router with the
UPNP function enabled, the router will automatically map the port, using the
UPNP settings, to the public network. Manual port mapping by the users will
not be necessary.
[Network Card]:
[Mode]:
[Server URL]:
[Data port map No.]:
[Web port map No.]:
© Copyright Qvis All software and documentation rights reserved.
Ⓡ
Figure 26
Select the type of network input card that will
connect to the UPNP router.
Designate mode and auto mode. Designate
mode means to specify the data mapping
and web mapping ports to the router. Auto
mode allows for the data mapping and web
mapping ports to be set up by the router.
IP address of the router with UPNP function.
Data mapping port of user-specified device
on the router (works only under specified
mode).
Web mapping port of user-specified device
on the router (works only under specified
mode).
41